2/1/11
Approx. 5 hrs
2/2/11
Approx. 7 hrs
2/3/11
Approx. 5 hrs
2/6/11
Approx. 3 hrs
2/7/11
Approx. 5 hrs
Total hrs = 5 + 7 + 5+ 2 +3 +5 = 27 hrs
I decided to use as much as February in order to finish the thesis. I have decided to finish the loose ends, but also include the historical part while dividing the testing and modeling back into separate chapters. This way if time becomes short then I can stop what I have done and include unfinished work at the end of each corresponding chapter. For example, say if a few sections in the historical chapters that I had added don't have anything written, I will simply make a note at the end of the chapter with references. However, the sections that have some stuff written I will try to finish in the meantime. This way I can finish the thesis, but still be able to add evidence here and there. I feel the chapter will be good enough with a couple of sections, then whatever I feel I need to add and time is out I can simple add a simple paragraph at the end of the chapter and of course the conclusion chapter of the thesis. I have added some material to the CFD section covering two analysis by the HyCAUSE team. I am currently working on what id now chapter 8 Analytical Modeling. So I feel I have a plan to incorporate as much work as possible, without having the pressure to finish it all completely. I have also converted some of the bullets to "tables" since they cannot be called or labeled as tables unless they have at least two columns. So they are in table format with no table number or label but with a caption. Some of the bullets can be turned into proper tables such as the author list.
Uploading ....